Ryobi Recalls Cordless Drills Due to Fire Hazard

Ryobi Recalls Cordless Drills Due to Fire Hazard

WASHINGTON, D.C. - The U.S. Consumer Product Safety Commission, in cooperation with the firm named below, today announced a voluntary recall of the following consumer product. Consumers should stop using recalled products immediately unless otherwise instructed. It is illegal to resell or attempt to resell a recalled consumer product.

Name of Product: Ryobi Model HP 1802M Cordless Power Drills

Units: About 455,000

Importer: Ryobi Technologies Inc., of Anderson, S.C.

Hazard: The switch on the cordless drill can overheat, posing a fire and burn hazard to consumers.

Incidents/Injuries: Ryobi has received 47 reports of the drills overheating, smoking, melting or catching fire, including 12 reports of property damage to homes or vehicles. Two of the incidents involved minor burns from touching an overheated switch.

Description: The Ryobi Model HP 1802M cordless drill is powered by an 18 volt rechargeable NiCad battery. The drills are blue and black in color with "Ryobi" appearing in red and white on the left side. The model number can be found on a white label on the right side of the drill.

Sold at: Home Depot from January 2001 to July 2003 for about $100.

Manufactured in: China

Remedy: Consumers should immediately stop using the recalled drill, remove the rechargeable battery and contact Ryobi to receive a free replacement drill.

Consumer Contact: For additional information, contact Ryobi Customer Service at (800) 597-9624 between 10 a.m. and 7 p.m. ET Monday through Friday or visit the firm's website at www.ryobitools.com

---

CPSC is still interested in receiving incident or injury reports that are either directly related to this product recall or involve a different hazard with the same product. Please tell us about it by visiting https://www.cpsc.gov/cgibin/incident.aspx

The U.S. Consumer Product Safety Commission is charged with protecting the public from unreasonable risks of serious injury or death from thousands of types of consumer products under the agency's jurisdiction. The CPSC is committed to protecting consumers and families from products that pose a fire, electrical, chemical, or mechanical hazard. The CPSC's work to ensure the safety of consumer products - such as toys, cribs, power tools, cigarette lighters, and household chemicals - contributed significantly to the decline in the rate of deaths and injuries associated with consumer products over the past 30 years.

To report a dangerous product or a product-related injury, call CPSC's Hotline at (800) 638-2772 or CPSC's teletypewriter at (301) 595-7054. To join a CPSC e-mail subscription list, please go to https://www.cpsc.gov/cpsclist.aspx. Consumers can obtain recall and general safety information by logging on to CPSC's Web site at www.cpsc.gov.

American Society of Safety Engineers (ASSE)

Are you a member of the American Society of Safety Engineers? If you are a safety professional and not a member, you are doing yourself a disservice!

I just moved back to upstate New York after a 14 year absence. And, last evening, I attended a meeting of the Central New York Chapter of ASSE. I've been an ASSE member for 25 years and as I moved around I joined chapters in Orlando, Fort Myers, and Dallas - all were very rewarding experiences. But, the CNY Chapter is where I started and it was great to renew old friendships.

It's interesting that all of the Safety Professionals with whom I commiserated over the years have become great friends. I remained in contact with many from Central New York over the past 14 years, and many from Central Florida, and will continue to keep in touch with my friends in Southwest Florida and Dallas. These people enrich my life both personally and professionally and we all continue to rely on each other for support in our careers.

I cannot imagine my safety career without my fellow ASSE members and if you are a safety professional who has not yet found ASSE - find your local chapter and join today! Click here for joinder information.

After my 14 year hiatus from the CNY ASSE Chapter, it felt like I hadn't even been away! So, the "moral of the story" is - if you join, attend your local chapter meetings! The networking is one of the most valuable things offered.

NOTW for 8-31-10

This week's NOTW photo was courtesy of your safety friends in the US Navy. If you have followed NOTW for some time, you may remember several references to "Bucket Man." Well the Naval Safety Guys refer to this guy as "Gutter Perch," and suggest that the Gutter Perch should become extinct.

You might also notice the inadequate scaffold - where's the guardrail (and the lack of any other type of fall protection). Or the lack of a hard hat - remember that hard hats are required on all scaffolds. And, who knows what other hazards we might find if we could see the whole picture. I'm betting that these guys climbed the crossbraces rather than using a ladder too.

Have a safe week.

Free Crane Standard Webinar

The new OSHA crane standard for cranes being used in construction takes effect on 8 November 2010. The OTI at UTA is offering a free webinar to help you understand the new law. It's on 21 September 2010 from 9 am to 11 am (presumably in the Central Time Zone). I don’t know how detailed this will be, but it is free. Click the link below to sign-up:
https://www.uta.edu/wconnect/CourseStatus.awp1?~~oshawebcrane

NOTW

Well, I'm looking for a safety position again so I've some free time to revise the blog. A good place to restart is to visit the NOTW postings that have been so popular over the past several years.

Here's one from April of this year. Once I get my routine down, I'll post some new ones and you are all encouraged to send some "nitwit" photos for the blog.

Unfortunately, this situation is all too common on construction sites. “Hot-Punch” is a term to describe the process by which recently installed circuits are tested before the electric meters have been installed. In this case, our electrician found the nearest power source (see inset) which was the temporary electrical panel outside, opened the junction box cover and installed a temporary wire leaving the junction box open and available for accidental contact by passers-by. He then proceeded to connect his newly energized cord to an open panel inside the building. ARE YOU KIDDING ME?

Admittedly, the likelihood of a passer-by contacting the energized wiring at the junction box may be slight, but the open, energized panel presents a significant hazard. The really sad thing is that this operation can be accomplished safely by utilizing one of the many knock-outs on the panel while leaving the cover in place. But, that might take a couple of extra minutes.

By now you know that lack of adequate training contributes to many hazards on construction sites. This, however, is not one of those situations. Assuming that the electrician is licensed (which he should be), he was tested on his knowledge of the National Electric Code and should know better.

Training-Training-Training

I have been pontificating for years about the critical need for training of workers. In my opinion, the lack of adequate training is the single biggest cause of jobsite injuries and fatalities. Well, if you didn't "get it" before, you had better start paying attention because OSHA has finally caught up.

Last week, during a speech to the National Action Summit for Latino Worker Health and Safety, Secretary of Labor Hilda Solis addressed worker training. She stressed the need for training in a form that can be understood by our Hispanic workforce - nothing new there. But she also stated that, effective on Workers Memorial Day (April 28th), "OSHA will also assure that its Compliance Officers check and verify not only that the training has been provided, but that it was provided in a format that the workers being trained can understand."

WARNING: you subcontractors that think that you are not responsible for the training of those "independent contractors" to which you "subcontract" the work (you know - piece workers), you had better rethink that idea. It is up to you to assure that every one of the workers in your workforce has adequate safety training. You might even want to review you subcontracts - you may find language in there that says you will assure that the workers for whom you are responsible, will be adequately trained in jobsite safety.

Don't know what training is required, Click here for assistance.

Construction Worker Injured in Building Collapse

New York City must be a pretty dangerous place to work if you are in the construction business. The New York Times reported on the 29th that a worker was critically injured in the collapse of a Brooklyn building being renovated.

The cause? Nobody knows for sure yet.